Cement-Lined Ductile Iron Pipe Thickness Class
Petersen Does Not Sell Pipe
Select Mechanical or Inflatable Pipe Plugs based on the below pipe ID and along with the pressure to be blocked
Diameters, Circumferences and Areas for Thickness Class Ductile Iron Standard Cement-Lined Pipe
Nominal Size Inches | Outside Diameter Inches | Inside Diameter Inches |
---|---|---|
3 | 3.96 | 3.33 |
4 | 4.80 | 4.15 |
6 | 6.90 | 6.27 |
8 | 9.05 | 8.38 |
10 | 11.10 | 10.39 |
12 | 13.20 | 12.45 |
14 | 15.30 | 14.45 |
16 | 17.40 | 16.53 |
18 | 19.50 | 18.61 |
20 | 21.60 | 20.69 |
24 | 25.80 | 24.85 |
30 | 32.00 | 30.97 |
36 | 38.30 | 37.19 |
42 | 44.50 | 43.31 |
48 | 50.80 | 49.53 |
54 | 57.56 | 56.17 |
*Based on ductile iron pipe class 50 nominal thickness for all sizes - except class 51 nominal thickness for 3" and 4" - as specified in awwa c151, and on standard cement lining minimum thickness specified in awwa c104. The value of pi (Π) used in calculations = 3.1416. |
Weights For Pipeline Design
Weight Of Thickness Class Ductile Iron Pipe And Contained Water
Thickness Class | Nominal Size Inches | Gallons Held (Per Foot) | Pipe (Pounds Per Foot) | Water (Pounds Per Foot) | Total (Pounds Per Foot) |
---|---|---|---|---|---|
51 | 3 | 0.45 | 10.1 | 3.8 | 13.9 |
51 | 4 | 0.70 | 12.7 | 5.9 | 18.6 |
50 | 6 | 1.60 | 18.2 | 13.4 | 31.6 |
50 | 8 | 2.86 | 25.8 | 23.9 | 49.7 |
50 | 10 | 4.40 | 33.9 | 36.7 | 70.6 |
50 | 12 | 6.32 | 43.2 | 52.7 | 95.9 |
50 | 14 | 8.51 | 55.1 | 71.1 | 126.2 |
50 | 16 | 11.14 | 64.7 | 93.0 | 157.7 |
50 | 18 | 14.12 | 74.5 | 117.9 | 192.4 |
50 | 20 | 17.45 | 84.8 | 145.7 | 230.5 |
50 | 24 | 25.17 | 106.6 | 210.1 | 316.7 |
50 | 30 | 39.10 | 139.3 | 326.4 | 465.7 |
50 | 36 | 56.38 | 182.6 | 740.7 | 653.3 |
50 | 42 | 76.46 | 229.8 | 638.3 | 868.1 |
50 | 48 | 100.00 | 282.7 | 834.8 | 1117.5 |
50 | 54 | 128.61 | 351.1 | 1056.2 | 1407.3 |
These weights are based on minimum class (thickness class 51 for 3" and 4" and class 50 for 6" through 54") ductile iron pipe with minimum thickness standard cement lining as specified in awwa c104 and on weight of water of 62.4 Pounds per cubic foot. The inside diameters are as given in table 1. |
The information may be used but with no warranty or liability. This information is believed to be correct but should always be double checked with alternative sources. Strictly adhere to and follow all applicable national and local regulations and practices.
Pipe Plugs for Testing, Blocking, Bypassing, Line Stopping, and More
- Low Pressure Gas Plugs, 154 Series
- Multi-Flex® High Expansion Gas Bag Style Pipe Plug, 113 Series
- Multi-Flex® High Pressure Block & Bleed Plugs, 127BB Series
- Multi-Flex® High Pressure Hydrocarbon Resistant Inflatable Pipe Plugs, 127 Series
- Multi-Flex® Oil Resistant With & Without Bypass Pipe Plug, 114-115 Series
- Multi-Flex® Oil-Resistant Heavy-Duty Pipe Plug, With & Without By-Pass, 124-125 Series
- Municipal Style By-pass Plugs Sizes, 130-2 Series
- PeteStop® Pipe Plug, Inflatable Flow Stop, 129-8 Series
- PeteStop® Pipe Plug, Inflatable Line Stop, 128 Series
- PeteStop® Pipe Plug, Inflatable Line Stop, 129 Series
- Point Repair Packer Carrier with & without By-Pass, 130-5 Series
- Rigid Core Remote Placement Bore Hole Plugs & Packers, 126 Series
- Rubber Aramid Reinforced Pipe Plugs, 136 Series
- Rubber Leak Detector Test Plugs, 130-4 Series
- Rubber Long Test Plugs, 130-3 Series
- Rubber Pillow Style Test Ball Plugs, 130-9 Series
- Rubber Plugs with Large Flow-Through By-Pass,130-6 Series
- Rubber Plumber Test Plugs, 130-0 Series
- Rubber Plumber Test Plugs, With & Without By-Pass, 137 Series
- Rubber Remote Placement Plugs, 130-7 Series
- Rubber Stack Test Plugs, 130-1 Series
- Through the Valve Line Stop
- Effluent Pumps & Accessories
- Hose Assemblies
- Inflation Controllers For Pipe Plugs and Packers - 936 Series
- Mechanical Plug Safety Gags, 936-5 Series
- Pipe Plug Inflation Accessories
- Pipe Plugs and Packers Accessories Pull Cages, 936 Series
- Rotating Elbows for Gas and Fluid Systems, 936 Series Petersen®
- ABS & SS Threaded Pipe End Test Plug, 143-8 Series
- ABS End of Pipe Gripper Plug, 143-9 Series
- Bolt Type High Pressure Test Plugs, 147 Series
- Bolt Type Medium Pressure Test Plugs With By-Pass, 146-9 Series
- Custom Mechanical Plugs, 145-2 Series
- EZ-Swet Mechanical Line Stopper Plugs, 148-0 Series
- Flush Mounted & Beveled Finishing Plate Plugs, 140-4 & 140-5 Series
- Hand Tightening Aluminum Body Flexible Double Test Plugs, 149-2 Series
- Hand Tightening Aluminum Body Test Plugs With By-Pass, 149-1 Series
- Hand Tightening Double Seal Wing Nut, 141-2 Series
- Hand Tightening Low Pressure Aluminum Body By-Pass Plugs, 141 Series
- Hand Tightening Low Pressure Nylon Plug, 144 Series
- Hand Tightening Nylon Pipe Plug, 142-0 Series
- Hand Tightening Nylon Test & Cleanout Plugs, 143-0 Series
- High Impact ABS Wing Nut Plug, 144-1 Series
- High Lift Flange Weld Test Plugs, 151-Series
- High PSI Double Block & Bleed Single Actuator, 145-1 Series
- Lever Type Expandable Rubber Plugs, 143-1 Series
- Mechanical High Pressure Test Plugs, 145-9 Series
- Monitor Well Plugs, 142-8 Series
- Pipe Protector Bell or Spigot End, 140 Series
- Pipeline Joint Tester, 24in to 120in, 145-8 Series
- Polypropylene End of Pipe Plugs, 143-4 Series
- Remote Placement Expander Plugs,148-3 Series
- Rubber Seal Mechanical Pipe Plugs, 143-2 Series
- Steel Wing Nut Pipe Plugs, 143-3 Series
- T-Handle Aluminum Test Plugs with & without By-Pass, 143-7 Series
- Tapered Redwood Pipe Plugs, 140-1 Series
- Test Caps, 142-9 Series
- Water Line Stub Plugs, 143-5 Series
- Wing Nut Hand Tight Test Plugs, 141-1 Series
- High Pressure Portable Hydrostatic Test Pumps, 938-9 Series
- Hydrostatic Test Pumps, 938-93 Series
- Leak Detector Pressure Testing, 924-1304 Series
- Leak Detector Pressure Testing, 924-1304 Series
- Manhole Vacuum Test Equipment, 938-7 Series
- Parachutes, Stringers, Ventilators, Smoke Blowers
- Pipeline Deflection Gauges, 938-96 Series
- Pipeline Joint Testers, Sizes 24" to 120", 145-8 Series
- Smoke Testers, 938-95 Series
- Smoke Testers, 938-95 Series