PeteStop® Pipe Plug, Inflatable Line Stop, 129 Series
Inflatable Line Stop Pipe Plugging System, 129 Series
Pipe Plug, PeteStop® Inflatable Line Stop - 129 Series
Quickly Block the Flow without depressurizing the pipeline!
The Petersen PeteStop 129-Series Line Stop is our best selling system. It is a great choice to complement a mechanical stop or use in place of because of its savings in time, money and lighter, more flexible installation. Plus the PeteStop Inflatable Line Stop is able to handle more difficult pipe conditions where a mechanical stop would be unable to get a workable seal.
Advantages of PeteStop 129-Series Pipe Plug Systems
- Faster smaller lighter weight equipment
- Less Expensive smaller hole and smaller equipment needed, less time to complete
- Safety Enhanced - smaller tap hole and larger surface area means less stress on pipe
- Lower Environmental Risk smaller tap hole
- Plug Abnormal Pipe Conditions - Heavy Corrosion, Out-of-Round Pipe, Weld Bead, etc.
- Versatility Most pressure, chemical, temperature requirements
- Limited Space Work Environment
- Minimal pressure to seal on pipe ID
- Multiple combinations Double Block & Bleed, Centered, Off-Center, Side, Flow Stop, High Pressure
- Reusable Heavyweight Ballistic Nylon reinforced Polyeurethane (Kevlar, Viton & others available)
- Conform to the pipe better
- Line Stop at pipe bend or near pipe bend
- Less Stress on Pipe with Structural Integrity Issues or Aging Pipe versus Mechanical Stop
- Great Complement to Mechanical Stop where there isnt a workable seal
- Stop flow in pipes over 50!!
Product Instruction Manual 129 Series
Note: It is best to stop the flow during the installation of PeteStop line stops. If not practical, the below maximum flow rate rule of thumb seems to be acceptable:
- 1/2 ft/sec for the 129-0 series standard and high pressure plugs
- 10 ft/sec for the 129-8 series Flow Stop plugs
| Dia. Max | Dia. Deflated | Dia. Hot Tap Hole, Min | Pipe Plug Inflation Max Press. | Pipeline Pressure Max Head | Port, Inflation | Port Location, Infl. | Shipping Wt. | Item Number | Price | Qty | Action |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 96" (2438mm) | 41" (1041mm) | 41" (1041mm) | 110 psi (7.58 bar) | 55 psi (3.79 bar)/126.9' (38.7 m) | 6" X 300 Lb ANSI | Centered on Diameter | 336 Lb (152.41 Kg) | 129-096-HP |
$254,600.00
|
|
|
| 96" (2438mm) | 23" (584mm) | 23" (584mm) | 15 psi (1.03 bar) | 7.5 psi (0.52 bar)/17.3' (5.27 m) | 4" X 300 Lb ANSI | Centered on Diameter | 240 Lb (108.86 Kg) | 129-096- |
$72,000.00
|
|
|
| 84" (2134mm) | 35" (889mm) | 35" (889mm) | 110 psi (7.58 bar) | 55 psi (3.79 bar)/126.9' (38.7 m) | 6" X 300 Lb ANSI | Centered on Diameter | 294 Lb (133.36 Kg) | 129-084-HP |
$207,000.00
|
|
|
| 84" (2134mm) | 19" (483mm) | 19" (483mm) | 15 psi (1.03 bar) | 7.5 psi (0.52 bar)/17.3' (5.27 m) | 4" X 300 Lb ANSI | Centered on Diameter | 210 Lb (95.26 Kg) | 129-084- |
$58,600.00
|
|
|
| 72" (1829mm) | 29" (737mm) | 29" (737mm) | 120 psi (8.27 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | 6" X 300 Lb ANSI | Centered on Diameter | 252 Lb (114.31 Kg) | 129-072-HP |
$135,200.00
|
|
|
| 72" (1829mm) | 19" (483mm) | 19" (483mm) | 20 psi (1.38 bar) | 10 psi (0.69 bar)/23.1' (7.03 m) | 4" X 300 Lb ANSI | Centered on Diameter | 180 Lb (81.65 Kg) | 129-072- |
$45,000.00
|
|
|
| 66" (1676mm) | 29" (737mm) | 29" (737mm) | 120 psi (8.27 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | 4" X 300 Lb ANSI | Centered on Diameter | 231 Lb (104.78 Kg) | 129-066-HP |
$103,800.00
|
|
|
| 66" (1676mm) | 17" (432mm) | 17" (432mm) | 20 psi (1.38 bar) | 10 psi (0.69 bar)/23.1' (7.03 m) | 4" X 300 Lb ANSI | Centered on Diameter | 165 Lb (74.84 Kg) | 129-066- |
$34,700.00
|
|
|
| 60" (1524mm) | 23" (584mm) | 23" (584mm) | 140 psi (9.65 bar) | 70 psi (4.83 bar)/161.5' (49.21 m) | 4" X 300 Lb ANSI | Centered on Diameter | 207 Lb (93.89 Kg) | 129-060-HP |
$98,600.00
|
|
|
| 60" (1524mm) | 28.5" (724mm) | 29" (737mm) | 10 psi (0.7 bar) | 5 psi (0.34 bar)/11.5' (3.5 m) | Through Centering Anchor | End | TBD | 129-060-D |
$98,300.00
|
|
|
| 60" (1524mm) | 17" (432mm) | 17" (432mm) | 20 psi (1.38 bar) | 10 psi (0.69 bar)/23.1' (7.03 m) | 4" X 300 Lb ANSI | Centered on Diameter | 148 Lb (67.13 Kg) | 129-060- |
$29,000.00
|
|
|
| 54" (1372mm) | 23" (584mm) | 23" (584mm) | 140 psi (9.65 bar) | 75 psi (5.17 bar)/173' (52.73 m) | 4" X 300 Lb ANSI | Centered on Diameter | 201.5 Lb (91.40 Kg) | 129-054-HP |
$60,900.00
|
|
|
| 54" (1372mm) | 28.5" (724mm) | 29" (737mm) | 30 psi (2 bar) | 15 psi (1.03 bar)/34.6' (10.6 m) | Through Centering Anchor | End | TBD | 129-054-D |
$70,200.00
|
|
|
| 54" (1372mm) | 15" (381mm) | 15" (381mm) | 30 psi (2.07 bar) | 15 psi (1.03 bar)/34.6' (10.55 m) | 4" X 300 Lb ANSI | Centered on Diameter | 144 Lb (65.32 Kg) | 129-054- |
$23,400.00
|
|
|
| 48" (1219mm) | 17" (432mm) | 17" (432mm) | 150 psi (10.34 bar) | 75 psi (5.17 bar)/173' (52.73 m) | 4" X 300 Lb ANSI | Centered on Diameter | 152.5 Lb (69.20 Kg) | 129-048-HP |
$55,500.00
|
|
|
| 48" (1219mm) | 22.75" (578mm) | 23" (584mm) | 30 psi (2 bar) | 15 psi (1.03 bar)/34.6' (10.6 m) | Through Centering Anchor | End | TBD | 129-048-D |
$64,100.00
|
|
|
| 48" (1219mm) | 15" (381mm) | 15" (381mm) | 30 psi (2.07 bar) | 15 psi (1.03 bar)/34.6' (10.55 m) | 4" X 300 Lb ANSI | Centered on Diameter | 109 Lb (49.44 Kg) | 129-048- |
$21,300.00
|
|
|
| 42" (1067mm) | 17" (432mm) | 17" (432mm) | 150 psi (10.34 bar) | 75 psi (5.17 bar)/173 ft (52.73 m) | 4" X 300 Lb ANSI | Centered on Diameter | 120 Lb (54.5 Kg) | 129-042-HP |
$40,500.00
|
|
|
| 42" (1066.8mm) | 22.75" (578mm) | 23" (584mm) | 40 psi (2.7 bar) | 20 psi (1.38 bar)/46.1' (14.1 m) | Through Centering Anchor | End | TBD | 129-042-D |
$58,000.00
|
|
|
| 42" (1067mm) | 15" (381mm) | 15" (381mm) | 40 psi (2.76 bar) | 20 psi (1.38 bar)/46.1' (14.06 m) | 4" X 300 Lb ANSI | Centered on Diameter | 83 Lb (37.65 Kg) | 129-042- |
$19,300.00
|
|
|
| 39.37" (1000mm) | 17" (432mm) | 17" (432mm) | 150 psi (10.34 bar) | 75 psi (5.17 bar)/173' (52.73 m) | 4" X 300 Lb ANSI | Centered on Diameter | 120 Lb (54.5 Kg) | 129-040-HP |
$38,600.00
|
|
|
| 40" (1016mm) | 22.75" (578mm) | 23" (584mm) | 40 psi (2.7 bar) | 20 psi (1.38 bar)/46.1' (14.1 m) | Through Centering Anchor | End | TBD | 129-040-D |
$54,400.00
|
|
|
| 40" (1016mm) | 15" (381mm) | 15" (381mm) | 40 psi (2.76 bar) | 20 psi (1.38 bar)/46.1' (14.06 m) | 4" X 300 Lb ANSI | Centered on Diameter | 83 Lb (37.65 Kg) | 129-040- |
$18,200.00
|
|
|
| 35.25" (895mm) | 17" (432mm) | 17" (432mm) | 150 psi (10.34 bar) | 75 psi (5.17 bar)/173' (52.73 m) | 4" X 300 Lb ANSI | Centered on Diameter | 103.5 Lb (46.95 Kg) | 129-036-HP |
$23,800.00
|
|
|
| 35.25" (895mm) | 18.8" (478mm) | 19" (483mm) | 50 psi (3.4 bar) | 25 psi (1.72 bar)/57.7' (17.6 m) | Through Centering Anchor | End | TBD | 129-036-D |
$51,000.00
|
|
|
| 36" (914mm) | 11.75" (298mm) | 11.875" (302mm) | 75 psi (5.17 bar) | 37.5 psi (2.59 bar)/86.5' (26.4 m) | 2" X 300 Lb ANSI | Centered on Diameter | 74 Lb (33.57 Kg) | 129-036- |
$17,000.00
|
|
|
| 31.75" (806mm) | 17" (432mm) | 17" (432mm) | 150 psi (10.34 bar) | 75 psi (5.17 bar)/173' (52.73 m) | 2" X 300 Lb ANSI | Centered on Diameter | 100 Lb (45.4 Kg) | 129-032-HP |
$20,900.00
|
|
|
| 31.25" (794mm) | 18.8" (478mm) | 19" (483mm) | 60 psi (4.1 bar) | 30 psi (2.07 bar)/69.2' (21.09 m) | (2) NPT Inflation Ports Internal to Flange | End | TBD | 129-032-D |
$46,400.00
|
|
|
| 32" (813mm) | 11.75" (298mm) | 11.875" (302mm) | 80 psi (5.51 bar) | 40 psi (2.76 bar)/92.3' (28.1 m) | 2" X 300 Lb ANSI | Centered on Diameter | 62 Lb (28.12 Kg) | 129-032- |
$15,400.00
|
|
|
| 29.5" (749mm) | 15" (381mm) | 15" (381mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 85.5 Lb (38.78 Kg) | 129-030-HP |
$19,700.00
|
|
|
| 29.25" (743mm) | 16.8" (427mm) | 17" (432mm) | 60 psi (4.1 bar) | 30 psi (2.07 bar)/69.2' (21.09 m) | Through Centering Anchor | End | 61 Lb (27.67 Kg) | 129-030-D |
$42,300.00
|
|
|
| 30" (762mm) | 11.75" (298mm) | 11.875" (302mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 2" X 300 Lb ANSI | Centered on Diameter | 61 Lb (27.67 Kg) | 129-030- |
$14,100.00
|
|
|
| 27.5" (699mm) | 12.5" | 15" (381mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 90 Lb (40.8 Kg) | 129-028-HP |
$18,500.00
|
|
|
| 27.25" (692.15mm) | 14.8" (376mm) | 17" (432mm) | 60 psi (4.1 bar) | 30 psi (2.07 bar)/69.2' (21.09 m) | Through Centering Anchor | End | 44 Lb (19.96 Kg) | 129-028-D |
$25,200.00
|
|
|
| 28" (711mm) | 11.75" (298mm) | 11.875" (302mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 2" X 300 Lb ANSI | Centered on Diameter | 60 Lb (27.22 Kg) | 129-028- |
$13,200.00
|
|
|
| 23.5" (597mm) | 13" (330mm) | 13" (330mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 61.5 Lb (27.90 Kg) | 129-024-HP |
$11,800.00
|
|
|
| 23.25" (591mm) | 14.8" (376mm) | 15" (381mm) | 60 psi (4.1 bar) | 30 psi (2.07 bar)/69.2' (21.09 m) | Through Centering Anchor | End | 44 Lb (19.96 Kg) | 129-024-D |
$21,300.00
|
|
|
| 23.25" (591mm) | 11.75" (298mm) | 11.875" (302mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 2" X 300 Lb ANSI | Centered on Diameter | 44 Lb (20 Kg) | 129-024- |
$8,400.00
|
|
|
| 19.25" (489mm) | 11.75" (298mm) | 11.875" (302mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 35 Lb (15.88 Kg) | 129-020-HP |
$9,000.00
|
|
|
| 19.25" (489mm) | 14.8" (376mm) | 15" (381mm) | 80 psi (5.5 bar) | 40 psi (2.76 bar)/92.3' (28.1 m) | Through Centering Anchor | End | 35 Lb (15.88 Kg) | 129-020-D |
$18,900.00
|
|
|
| 19.25" (489mm) | 9.75" (248mm) | 9.875" (251mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 1-1/4" X 300 Lb ANSI | Centered on Diameter | 35 Lb (15.88 Kg) | 129-020- |
$6,510.00
|
|
|
| 17.25" (438mm) | 11.75" (298mm) | 11.813" (300mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 46 Lb (20.87 Kg) | 129-018-HP |
$7,000.00
|
|
|
| 17.25" (438mm) | 12.7" (323mm) | 13" (330mm) | 80 psi (5.5 bar) | 40 psi (2.76 bar)/92.3' (28.1 m) | Through Centering Anchor | End | 33 Lb (14.97 Kg) | 129-018-D |
$12,900.00
|
|
|
| 17.25" (438mm) | 9.75" (248mm) | 9.875" (251mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 1-1/4" X 300 Lb ANSI | Centered on Diameter | 33 Lb (14.97 Kg) | 129-018- |
$5,040.00
|
|
|
| 15.25" (387mm) | 11.75" (298mm) | 11.875" (302mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 39 Lb (17.69 Kg) | 129-016-HP |
$5,400.00
|
|
|
| 15.25" (387mm) | 12.7" (323mm) | 13" (330mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-016-D |
$11,700.00
|
|
|
| 15.25" (387mm) | 9.75" (248mm) | 9.875" (251mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 1.25" X 300 Lb ANSI | Centered on Diameter | 28 Lb (12.70 Kg) | 129-016- |
$3,890.00
|
|
|
| 13.25" (337mm) | 9.75" (248mm) | 9.875" (251mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 36.5 Lb (16.56 Kg) | 129-014-HP |
$4,830.00
|
|
|
| 13.25" (336.55mm) | 11.75" (298mm) | 11.875" (302mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-014-D |
$10,300.00
|
|
|
| 13.25" (337mm) | 7.75" (197mm) | 7.875" (200mm) | 100 psi (6.90 bar) | 50 psi (3.45 bar)/115.3' (35.2 m) | 1" X 150 Lb ANSI | Centered on Diameter | 26 Lb (11.79 Kg) | 129-014- |
$3,470.00
|
|
|
| 12" (304.8mm) | 9.75" (248mm) | 9.875" (251mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7' (70.31 m) | 2" X 300 Lb ANSI | Centered on Diameter | 36 Lb (16.33 Kg) | 129-012-HP |
$3,260.00
|
|
|
| 12" (305mm) | 9.75" (248mm) | 120 psi (8.28 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-012-D |
$7,800.00
|
|
||
| 12" (305mm) | 7.75" (197mm) | 7.875" (200mm) | 120 psi (8.28 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | 1" X 150 Lb ANSI | Centered on Diameter | 26 Lb (11.79 Kg) | 129-012- |
$2,630.00
|
|
|
| 10" (254mm) | 7.75" (197mm) | 7.875" (200mm) | 240 psi (16.55 bar) | 120 psi (8.27 bar)/276.8' (84.4 m) | 1.5" Inflation Ram Adapter | Centered on Diameter | 15 Lb (6.80 Kg) | 129-010-HP |
$3,260.00
|
|
|
| 10" (255mm) | 9.75" (248mm) | 9.875" (251mm) | 120 psi (8.28 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | Through Centering Anchor | End | 26 Lb (11.79 Kg) | 129-010-D |
$6,930.00
|
|
|
| 10" (254mm) | 5.75" (146mm) | 5.875" (149mm) | 120 psi (8.28 bar) | 60 psi (4.14 bar)/138.4' (42.2 m) | 1" Inflation Ram Adapter | Centered on Diameter | 11 Lb (4.99 Kg) | 129-010- |
$2,310.00
|
|
|
| 8" (203mm) | 5.75" (146mm) | 5.875" (149mm) | 240 psi (16.54 bar) | 120 psi (8.27 bar)/276.8' (84.4 m) | 1.5" Inflation Ram Adapter | Centered on Diameter | 12.6 Lb (5.72 Kg) | 129-008-HP |
$2,420.00
|
|
|
| 8" (203mm) | 7.8" (198mm) | 7.875" (200mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | Through Centering Anchor | End | 9 Lb (4.08 Kg) | 129-008-D |
$6,000.00
|
|
|
| 8" (203mm) | 5.75" (146mm) | 5.875" (149mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | 1" Inflation Ram Adapter | Centered on Diameter | 9 Lb (4.08 Kg) | 129-008- |
$1,995.00
|
|
|
| 6" (152mm) | 3.875" (98mm) | 3.875" (98mm) | 230 psi (15.86 bar) | 115 psi (7.93 bar)/265.3' (80.9 m) | 1" Inflation Ram Adapter | Centered on Diameter | 7 Lb (3.18 Kg) | 129-006-HP |
$2,210.00
|
|
|
| 6" (152.4mm) | 5.8" (147mm) | 5.875"( 149mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | Through Centering Anchor | END | 10 Lb (4.5 Kg) | 129-006-D |
$5,600.00
|
|
|
| 6" (152mm) | 3.75" (95mm) | 3.875" (98mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | 1" Inflation Ram Adapter | Centered on Diameter | 5 Lb (2.27 Kg) | 129-006- |
$1,890.00
|
|
|
| 4" (101.6mm) | 3.875" (98mm) | 3.875" (98mm) | 200 psi (13.8 bar) | 100 psi (6.89 bar)/230.7' (70.3 m) | 1" Inflation Ram Adapter | Centered on Diameter | 5.6 Lb (2.54 Kg) | 129-004-HP |
$1,890.00
|
|
|
| 4" (102mm) | 3.75" (95mm) | 3.875" (98mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | 1" Inflation Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-004- |
$1,580.00
|
|
|
| 3" (76mm) | 2.875 (73mm) | 2.875 (73mm) | 200 psi (13.79 bar) | 100 psi (6.89 bar)/230.7 ft (70.3 m) | .25" MNPT With 1" Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-003-HP |
$1,790.00
|
|
|
| 3" (76mm) | 2.875" (73mm) | 2.875 (73mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | .25" MNPT With 1" Ram Adapter | Centered on Diameter | 3 Lb (1.36 Kg) | 129-003- |
$1,580.00
|
|
|
| 2" (51mm) | 1.875" (48mm) | 1.875" (48mm) | 200 psi (13.8 bar) | 100 psi (6.89 bar)/230.7' (70.3 m) | .25" MNPT With 1" Ram Adapter | Centered on Diameter | 4 Lb (1.81 Kg) | 129-002-HP |
$1,790.00
|
|
|
| 2" (51mm) | 1.75" (44mm) | 1.875" (48mm) | 160 psi (11.03 bar) | 80 psi (5.52 bar)/184.5' (56.25 m) | .25" MNPT With 1" Ram Adapter | Centered on Diameter | 3 Lb (1.36 Kg) | 129-002- |
$1,680.00
|
|
